| Assembling
of Larius V71 and V77 conventional guns. |
|
| All
Larius pneumatic pumps can be fitted on wall support also. |
|
LARIUS 2 ON FRAME WITH PAINT HEATERS.
|
|
 |
| Larius
2 pump complete on frame, Larius 2 pump complete on frame- very light, ready to move in any
working place. The frame can be demounted to allow an easy transport. |
Larius 2 pump complete on wall support, ready to be fixed at the most suitable place in the workshop, is ideal
for direct suction from large paint drums. |
|
Larius 2 pump on trolley with gravity hopper, complete with all the accessories for any small or big application.
|
Larius 2 complete on 25 litre pail with rigid suction. Ideal for high production. |
| TECHNICAL DATA |
| RATIO |
1:1 |
| MAX
DELIVERY |
12 litri/min. |
| PUMP
AIR CONSUMPTION |
90 litri/min. |
| GUN
AIR CONSUMPTION |
240 litri/min. |
| MAX
PRODUCT PRESSURE |
7 BAR (100 PSI) |
|
MAX AIR INLET PRESSURE
|
7 BAR (100 PSI) |
| DIAPHRAGM |
Gum
- PTFE |
| WORKING
PRESSURE |
1-7 BAR |
Via Stoppani, 21
23801 CALOLZIOCORTE LC ITALY
Tel.+39 0341 62.11.52 - Fax +39 0341 62.12.43
larius@larius.com |
|
|
LARIUS 2
|
|
Larius 2 are low pressure conventional
spraying units. The product will be atomised by a flow of compressed air that
will also transfer the paint to the workpiece. The heart of the Larius 2 unit
is a pneumatic double diaphragm pump where two chambers are alternatively
sucking and delivering the material, through the action of two PTFE diaphragms
connected to a shaft in traverse alternate movement. The two chambers are
connected through a suction collector and a delivery collector. The alternate
movement is provided by a dedicated inversion device powered by compressed air.
|
LARIUS V 71 P
|
|
Conventional spray gunsuitable
for low medium viscosity paints. Thanks to the wide nozzle range allows the
best finishing quality.
|
LARIUS V 77 P
|
|
Light and balanced as well as the V71P model, it is advisable for medium
high viscosity paints.
|
|
